Sewer camera and backwater valve service in Arden Hills, MN 55112

Lots in Arden Hills tend to be larger than in the older inner ring suburbs, and homes often sit well back from the street. That means a longer sewer lateral, more joints, and more chances for a tree root or a settled section to cause trouble. A clog at the far end looks the same from the basement as one right under the floor.

Running a camera through the line answers the real question: where is the problem, and what is it? We record the footage, mark the depth and location of any defect, and walk you through it. If you're buying a home here, a camera inspection before closing is a smart way to avoid inheriting a broken line.

Some Arden Hills homes, especially walkouts and houses set below street grade, have basement fixtures sitting lower than the sewer main. During a heavy storm or a main line blockage, sewage can push back up through the lowest drain in the house. A backwater valve lets water leave but closes when flow reverses.

We install these valves on the main drain line inside the basement, usually by cutting into the floor near the cleanout. The valve needs a clear access cover so it can be checked and cleaned once a year. We'll look at your layout and tell you whether a backwater valve fits your situation or whether another fix makes more sense.

Many Arden Hills houses from the 1970s and 1980s have a finished lower level with the mechanicals closed into a small room. That makes a leaking water heater more costly here than in an unfinished basement. Signs to watch include rust on the tank jacket, water in the drain pan, or popping sounds while the burner runs.

We replace tanks with a size that matches your household, pull the city permit, and check the venting and relief valve line while we're there. We also recommend flushing the tank every year or two, since sediment settling on the bottom is what usually shortens a heater's life, and a quick flush costs far less than a soaked carpet.