Faucet repair and replacement in Saint Paul, MN
A faucet that drips all night, sprays from the handle, or leaks into the cabinet below usually needs one worn part. Sometimes it needs replacing. We'll tell you which, honestly.
- Phone answered 24/7
- Saint Paul office on E 7th Street
Tell us what you see and hear. We explain the visit and the likely cost on the phone. (651) 215-2087
The short answer
Faucet repair and replacement fixes dripping, leaking, stiff or low flow kitchen, bathroom and laundry faucets. You need it when water drips from the spout, leaks at the handle or base, or the cabinet below stays wet. We identify the cartridge or valve type, rebuild it with matched parts, or install a new faucet and supply lines. Typical Saint Paul jobs run $163 to $487.
What's actually wrong inside a dripping faucet?
It depends on the faucet's valve type. Older two handle faucets, common in pre-war bathrooms and laundry sinks, use compression valves with rubber washers that press against a brass seat. The washer hardens and the seat wears, so water slips past. Newer faucets use ceramic disc or plastic cartridges with O rings, and those wear or crack.
A ball type faucet, common on older single handle kitchen sinks, has a set of springs and seats that wear out together. Knowing which type you have tells us exactly which parts to bring. If you can, snap a photo of the faucet and the area under the sink before you call, and we'll often know the brand and cartridge before we arrive.
What faucet repair and replacement costs in Saint Paul
These are typical Saint Paul ranges for faucet work. Your price is confirmed after we see the faucet, sink and shutoffs.
| Job | Typical range |
|---|---|
| Faucet cartridge or washer repairMost name brand drips and stiff handles | $163 to $287 |
| Bathroom faucet replacement, labor and partsIncludes new supply lines and drain connection | $247 to $443 |
| Kitchen faucet replacementPull down and sprayer models, faucet cost separate | $287 to $487 |
| Shutoff valve replacement under the sinkSwap old multi turn stops for quarter turn valves | $117 to $243 |
What moves the price
- Faucet type and whether parts are readily available
- Condition of the shutoff valves and supply lines under the sink
- Corroded or seized mounting nuts on older sinks
- Sink hole count and whether a deck plate is needed
- Whether you supply the faucet or we provide it
Typical Saint Paul ranges. We confirm your price after we see the job and before work starts. See every price on one page.
How faucet repair and replacement goes, start to finish
Identify the faucet
We find the brand, model and valve type so we can match the right cartridge, washer or seat.
Check the shutoffs
We test the valves under the sink and replace them if they won't close or are already dripping.
Repair or replace
We explain whether rebuilding or a new faucet makes more sense, with the price for each.
Rebuild the valve
For repairs, we clean the body, replace the cartridge, O rings or seat, and reassemble it smoothly.
Install with new supply lines
For replacements, we mount the faucet tight, connect braided lines, and seal the base.
Test for leaks
We run hot and cold, check every connection under the sink, and clean the aerator.
When is a faucet worth rebuilding?
A well made faucet from a brand like Moen, Delta, Kohler or American Standard is usually worth rebuilding. Their cartridges are easy to find, and a new cartridge makes the faucet work like new for years. Older chrome bathroom faucets in Victorian and craftsman houses often have solid brass bodies, and many owners want to keep them for the look.
Rebuilding stops making sense when the body is cracked, the finish is corroding through, parts are discontinued, or the faucet leaks from more than one place at once. Builder grade faucets with plastic bodies also tend to fail again quickly. In those cases a new faucet often costs only a little more than the repair and lasts far longer.
- Rebuild: name brand faucet, solid body, one worn cartridge
- Rebuild: vintage brass faucet you want to keep
- Replace: cracked body or corroded finish
- Replace: discontinued parts or multiple leak points
- Replace: low cost plastic faucet that keeps failing
How we install a new faucet so it doesn't leak later
Most faucet leaks after a replacement come from the parts nobody sees: old shutoff valves, kinked supply lines, or a mounting nut that wasn't snug. We start by checking the stops under the sink. Old multi turn valves in Saint Paul homes often won't close fully, so we replace them with quarter turn valves when needed.
We use new braided stainless supply lines, seal the base properly for the sink material, and tighten the mounting hardware so the faucet won't loosen with daily use. For kitchen faucets with pull down sprayers, we route the hose so it doesn't catch on the drain or disposal. Then we flush the lines before installing the aerator so loose scale doesn't clog it on day one.
If your sink has a different number of holes than the new faucet, we'll use a deck plate or choose a faucet that fits, and we'll talk through that before you buy.
Bathroom, kitchen and laundry faucets need different fixes
Kitchen faucets take the most abuse, with pull down hoses, sprayers and constant use, so cartridge wear and hose leaks are common. Bathroom faucets more often have slow drips, loose handles and pop up drain trouble. Laundry and utility sinks in basements often have old compression valves and threaded spouts that start leaking at the base.
We carry common cartridges and repair kits for the major brands on the truck, so many repairs are done in one visit. For a full replacement, you can pick out a faucet yourself or we can suggest a few that fit your sink and budget.
Signs it is time for faucet repair and replacement
Steady drip from the spout
A drip that won't stop when the handle is closed means a worn cartridge, washer or seat inside the valve.
Water at the handle or base
Leaks around the handle or where the faucet meets the sink usually come from failed O rings or a loose mounting nut.
Wet cabinet floor
Water under the sink can be a leaking supply line, a sprayer hose, or the faucet body itself dripping down.
Stiff or grinding handle
A handle that's hard to turn or feels gritty often has mineral buildup inside the cartridge.
Weak flow from one faucet
If only one faucet is weak, the aerator or cartridge is likely clogged with scale or debris from old pipes.
Hot and cold won't mix right
A single handle faucet that jumps between temperatures usually has a worn mixing cartridge.
Faucet trouble in Saint Paul homes and hard water suburbs
In older Saint Paul houses, faucets fail for reasons beyond simple wear. Galvanized supply pipe sheds rust flakes that lodge in cartridges and aerators, so a faucet can lose flow or start dripping after nearby plumbing work stirs up debris. We often see this in Payne-Phalen, the West Side and Merriam Park, where original galvanized lines still feed some sinks.
Out in Woodbury, Cottage Grove and other east metro suburbs with hard water, the problem is scale. Minerals build up on ceramic discs, O rings and aerators, making handles stiff and seals leak. Cleaning the aerator every few months helps. If a faucet keeps scaling up quickly, it may be worth looking at a water softener to protect your fixtures.
Where we do faucet repair and replacement
Saint Paul and the surrounding east metro. These are the busiest ZIP codes on our board; the full list has 55 neighborhoods, cities and counties.
Questions about faucet repair and replacement
Is it cheaper to repair or replace a dripping kitchen faucet in Saint Paul?
For a name brand faucet with a solid body, a cartridge repair is usually cheaper and works well. For an inexpensive faucet, one with a cracked body, or one leaking in several places, replacement often costs only a little more and lasts longer. We give you both prices on the visit so you can choose.
Can I buy my own faucet and have you install it?
Yes. Just check that it matches your sink's hole count and that it's a known brand with available parts. Bring us the model number when you call so we can confirm it will fit. We'll install it with new supply lines and check the shutoff valves while we're under the sink.
Why does my faucet still drip after I replaced the washer?
On compression faucets, the brass seat the washer presses against wears too. A new washer on a pitted seat will still leak. We either replace the seat or resurface it. On cartridge faucets, a new washer won't help at all, since the cartridge itself is the part that seals.
Can you repair an old vintage faucet in a historic Saint Paul bathroom?
Often, yes. Many vintage faucets have solid brass bodies and standard compression valves, and we can replace washers, seats and stems. Some parts are harder to find, so we may need to source them. If a faucet can't be saved, we'll suggest reproduction styles that match the period look.
Brands we work on in Saint Paul homes
- Kohler
- Moen
- Delta
- American Standard
- Rheem
- A. O. Smith
- Bradford White
- Navien
- Rinnai
- InSinkErator
- Zoeller
- Liberty Pumps
- Watts
- Weil-McLain
Call the Saint Paul office, day or night
A real person picks up at any hour. Tell us what you are seeing, and we will tell you what happens next and roughly what it costs.
(651) 215-2087- Phone
- Answered 24 hours a day, 7 days a week
- Office
- 289 E 7th Street, Saint Paul, MN 55101
- Headquarters
- 50666 229th Ave, Bemidji, MN 56601
- Coverage
- Saint Paul and the east metro, see all areas